Silicosis

The scarring of the lung tissue caused by RCS causes a loss of lung function, usually over a period of years. In the early disease stages, there are often no symptoms. However, shortness of breath can develop which can eventually impact the ability to walk even short distances.

Chronic obstructive pulmonary disease (COPD)

COPD is a long-term illness that develops gradually over several years. The lungs are permanently damaged making it difficult to breathe.

High-risk occupations

These include quarrying, slate works, foundries, potteries, stone working, construction (when cutting or breaking stone, concrete, or brick), and industries using silica flour to manufacture goods.

In some parts of Australia, one in four stone workers have silicosis because of silica dust.

Options for the Protection

• Engineering Controls: Use automated cutting equipment as much as practicable.
• Water suppression: Use tools that are fitted with water attachment as much as practicable.
• Local Exhaust Ventilation: Use tools that are designed for local dust extraction as much as practicable.
• Use effective Respiratory Protection Equipment (RPE)

What Kind of RPE Should Be Used?

RCS dust can accumulate when it goes deep into the lungs. So there is no safe limit of exposure when cutting stones is your daily work year after year. The safest way is to wear the highest protection RPE on a daily basis in addition to engineering control, water suppression, and local exhaust ventilation.

• Paper masks have unreliable facial seals even though the mask may appear to fit well initially: the seals may break with facial movement and sweat, especially when doing tough physical jobs. While you concentrate on doing your jobs, it is unlikely you will mind your mask fitting to ensure there is no leak most of the time, leaving you vulnerable to hazardous dust.
• Most APRs have better seals thanks to the elastomeric mask cushion. However, inevitably, leaks will still be present, although less than in paper masks. Due to negative pressure inside the mask, dust can still be sucked in through the small gaps. Besides, being non-powered means your lungs need to work harder to overcome the resistance of the filter. For physically demanding jobs, frequent breaks and rest are needed.
• PAPRs have more reliable protection: the pressure inside the mask is positive, meaning the air tends to push out from inside the mask preventing outside dust from getting in. In addition, the blower in the PAPR does the hard work to suck the air through the filter without your extra effort to breathe, making your tough job easier, especially in hot conditions.

Why Aimwell AYO WX PAPR is an Ideal RPE for Stone Workers?

Due to high cost, heavy weight, bulky sizes, troublesome hose, belt, and difficulty to use and buy, PAPRs are less used by stone workers in situations where PAPRs would provide the best protection.

Not anymore, AYO WX can remove all these obstacles.

Invented, designed, and fine-tuned in Australia, AYO WX is a state-of-the-art PAPR that stands out from the rest in that:

• It has a very high protection factor: PAPR P3
• It has a very high fit factor: demonstrated by superb results from Portacount Fit Testing.
• Very affordable price – a fraction of most PAPRs on the market.
• It is very comfortable to breathe: Thanks to the breath-responsive airflow control.
• Lightweight and low-profile: Easier for doing tough jobs.
• Long battery life: 8 – 16 hours per full charge.
• Very long service life: Battery replaceable.
• Very easy to operate, clean, and maintain.
• Designed for flush-wash after use in heavy dust.
• Very low running costs: With low-cost pleated pre-filter, no need to change the higher-cost HEPA filter frequently.

AYO WX is the first PAPR that is finally within reach by most stone workers.

• The Best P3 Dust Mask AYO WX Breath Responsive Powered Respirator
• Ideal for silica dust and asbestos protection

Download the brochure

Click to visit the product page

Watch Donning and Doffing Video

Quick Steps to Use AYO WX PAPR

• Charge the battery before use.
• Fit the mask assembly first and tighten the strap at the back of the neck.
• Remove the Guard Link from the Main Unit, Press the On/Off button, then hold the Filter Unit in the left hand, and Control Unit in the right hand, then slide the Main Unit down against the back of your head until it rests on the two supporting hooks of the head strap.
• Push-fit the mask to each end of the Main Unit.
• Pull the buckles of the head strap over the rubber neck pad.
• Then breathe and off you go!