AYO WX-STD Half Face Mask PAPR System
$558.80
AYO WX-STD – a half-mask PAPR system, as one of the models within AYO WX around-neck series modular PAPRs, is configured and optimized for asbestos, silica dust, metalliferous dust, powder coating, coal dust, and sawdust protection.
This state-of-the-art and patented powered mask represents the best PAPR technology in the world. Different from most traditional PAPRs which are heavy, and bulky, with nuisance long hoses, troublesome belt-mounting, and prohibiting cost, the AYO WX-STD System is lightweight, low-profile, and low-cost, yet generates powerful flow when needed to create positive air pressure inside the mask for your best protection, thanks to our world-best smart breath-responsive flow control technology.
AYO WX-STD System sets a new standard of high-level respiratory protection on many dusty worksites.
The system includes everything to get started, but to save the trouble of buying new filters soon, we recommend buying together a pack of 3 Main Filter and a pack of 10 Pre-filter.
- Positive pressure ensured by world-leading Breath-responsive flow control technology with over 200 L/min peak flow.
- Superb protection level – PAPR P3 with nominal protection factor > 2000
- Superb fit factor of typically over 2000 (Power-off mode with clean-shaven)
- 可用于常见的短胡须——且比大多数宽松的PAPR保护效果好。
- 电池容量充足，运行时间长达16 小时。
- 电池可更换。
- Around-neck PAPR invention: no hose, no belt, not top-heavy, not face-heavy.
- Low profile, lightweight, and great wearability – worn just like a non-powered APR.
- Compatible with most helmets, protective goggles, and earmuffs.
- 非常易于操作、清洁和维护
|
Compliance |
Respiratory Protection |
(P3 filter filtration efficiency) |
| EMC |
|
|
| Safety |
|
|
| BSI Benchmark |
|
|
| Operation Conditions | Altitude | -1000m to 1000m |
| Temperature | -10°C to 45°C (14°F to 113°F) | |
| Humidity | Up to 95% (non-condensing) | |
| Battery Run Time | Particulate | Typically, 8 – 16 hours depending on the actual workload and dust concentration. |
| Peak Flow | Particulate | Above 200 l/min |
| Manufacturer Minimum Flow Condition | 120 l/min | |
| Weight (Power Unit) | ~ 500g | |
| AC Charge Adaptor | Input | 100 ~ 240VAC, 47~60 Hz |
| Output | 13.8VDC, 1A | |
| DC Jack plug | 1.1mm pin, 3.0mm barrel | |
| Battery Charging Conditions | Charge Temperature | 0°C – 35°C |
| Charge Time |
|
BSI Benchmark Product Certification
Certified with Australian Standard
Australian Owned & Operated
Free Shipping within Australia
*for purchases with a minimum order value of $100.